"Yale Doormaster Professional" Repair Multipoint Door Lock
We've chosen the "Professional" from the "Yale Doormaster" range of locks as it's the best quality and easiest to fit.
This lock has been designed to replace most multipoint door locks fitted to UPVC doors. It is suitable providing the original lock to be replaced fits the following criteria:
- 16mm wide faceplate
- Backset of 35 or 45mm,
- Spindle to key measurement of 92mm.
- Has top and bottom hooks or bolts
- Spindle to top hook/bolt measurement of between 385-820mm
- Spindle to bottom hook/bolt measurement of between408-845mm
The Yale Doormaster Professional is supplied with fitting instructions and fixing screws. Included are half spindles for use with lever/pad handles, if used these restrict access from outside to key holders only.
Yale Doormaster Professional Lock Specification:
Spindle to key: 92mm
Split spindle follower, allows use of lever/lever or lever/pad handles.
Backset: 35mm or 45mm
Lever Lever or lever pad locking operation
1 centre latch
Supplied as a 3 piece lock, cut and assembled together on site.
Adjustable universal keeps supplied for all locking points.
Crop the lock to vary the hook positions.
16mm faceplate width
The centre latch can be handed LH or RH
Click here to view "Backset" and "Spindle to key" measurements
Click here to view suitable Lever/Pad door handles.
Click here to view suitable Lever/Lever door handles.
Please check that these handles cover any existing screw holes in the door.