ABT Gibbons York Mk 1 Multipoint Door Lock
ABT Door Lock Specification:
1 centre latch
Lever/Lever, Lever/Pad or "key turn only" locking operation.
Click here to view "Backset" and "Spindle to key" measurements
This ABT door lock can be handed LH or RH by removing the centre latch and turning it.
This lock can be used with concealed shootbolts or as part of a three deadbolt mechanism. To use it in this manner a small machine screw must be removed from one side of the gearbox.
Only the central gearboxes are available now but this is usually the part that fails.
We only sell these without the 'snib'.
If you have the rod type shootbolts that poke out the topside and underside of the door then follow this procedure to remove the door lock:
Click here to view compatible Lever/Lever door Handles.
Looking down on the top surface of the door, remove the plastic guide from around the shootbolt. The plastic guide will either be screwed or riveted on (if its riveted, drill off the rivet top being careful not to drill too far into the plastic guide, and re-rivet it back on later with new rivets). Once the guide has been pulled out, insert an allen key in the end of the shootbolt and turn anti-clockwise several times. Repeat the process on the bottom shootbolt. Once both shootbolts have been unscrewed from the ABT centre lock it can be removed from the door. Sometimes you may have to remove the door from its hinges to access the bottom shootbolt.