Cego upvc Door Lockcase OLD TYPE
Cego Old Type Lock Specification:
1 centre latch,
Lever/Lever or Lever/Pad locking operation,
The centre latch can be handed LH or RH by removing and turning it.
Click here to view "Backset" and "Spindle to key" measurements
Fitting this CEGO centre lock case
Remove the CEGO Multipoint (lock strip) lock from the door by first removing the handles, the lock barrel and the screws that hold the strip to the side of the door. With the CEGO lock strip removed, remove the centre case screws that hold the CEGO gearbox onto the locking strip, swap the gearbox, and put the whole locking system back in the door. Simple 20 min job using a screw driver.
This CEGO case will replace the gearboxes the old type CEGO upvc door locks. Although the CEGO multipoint locks have different widths and different locking points, they use exactly the same gearbox to operate the mechanism. To identify which make of lock you have, look on the locking strip when the door is open, it should have the makers name on it.