ERA upvc Door Lock (Central Gearbox only)
ERA Centrelock Specification:
1 centre latch,
Lever/Lever, Lever/Pad locking operation,
The centre latch can be handed LH or RH by removing and turning it.
Click here to view "Backset" and "Spindle to key" measurements
Click here to view suitable Lever/Lever door handles.
Click here to view suitable Lever/Pad door handles.
Please check that these handles cover any existing screw holes in the door.
Fitting this ERA centre lock case
Remove the ERA Multipoint (lock strip) lock from the door by first removing the handles, the lock barrel and the screws that hold the strip to the side of the door. With the ERA lock strip removed, remove the centre case screws that hold the ERA gearbox onto the locking strip, swap the gearbox, and put the whole locking system back in the door. Simple 20 min job using a screw driver.
This Era case will replace the gearboxes on most ERA upvc door locks and the newer Composite Wooden type doors. Although the ERA multipoint locks have different widths and different locking points, they use exactly the same gearbox to operate the mechanism. To identify which make of lock you have, look on the locking strip when the door is open, it should have the makers name on it.