GU Door Lock Specification:
Spindle to key: 92mm
Backset: 28mm or 35mm
Lever Lever locking operation (Lever Pad, split spindle follower option also available)
1 centre latch
16 mm wide silver lock strip.
This GU lock can be handed LH or RH (instructions on side of lock).
The letters GU will be engraved somewhere on the lockstrip.
Click here to view "Backset" and "Spindle to key" measurements
Centre of spindle hole to centre of top hook gearbox:568mm
Centre of spindle hole and centre of bottom hook gearbox:660mm
This GU door lock can be used as a direct replacement for the old type. The centre latch and deadbolt keeps may need re-positioning slightly. The images below show the old type GU multipoint lock which is only here to help you identify yours. To lock the door: lift the handle then turn the key.
Split spindle follower: allows the GU multipoint lock to work with lever/pad handles so that a key must be used to gain access even when the door isn't locked (available in 35mm b/set only)
Click here to view suitable lever/lever handles.
Compatible Lever/Pad handles:
Hoppe Atlanta 220mm 92/92PZ Lever Pad Handles
Hoppe 240mm 92/92PZ Lever Pad Handles
Please check that these handles cover any existing screw holes in the door.