GU Multipoint Door Lock Specification:

Spindle to key: 92mm
Backset: 28mm or 35mm
Lever Lever locking operation (Lever Pad, split spindle follower option also available)
1 centre latch
3 deadbolt
16 mm wide silver lock strip.
This GU door lock can be handed LH or RH (instructions on side of lock).
The letters GU will be engraved somewhere on the lockstrip.

Click here to view "Backset" and "Spindle to key" measurements

Centre of spindle hole to centre of top deadbolt gearbox:736mm
Centre of spindle hole and centre of bottom deadbolt gearbox:871mm

This product can be used as a direct replacement for the old type GU lock. The centre latch and deadbolt keeps may need re-positioning slightly. The top and bottom deadbolts are now thicker than previously so new keeps might be required. The images below show the old type GU multi point lock which is only here to help you identify yours. To lock the door: lift the handle then turn the key.

Split spindle follower: allows the multipoint lock to work with lever/pad handles so that a key must be used to gain access even when the door isn't locked (available in 35mm b/set only)

Click here to view suitable lever/lever handles.

Compatible Lever/Pad handles:
Hoppe Atlanta 220mm 92/92PZ Lever Pad Handles
Hoppe 240mm 92/92PZ Lever Pad Handles

Please check that these handles cover any existing screw holes in the door.