Lockmaster Multipoint Door Lock Specification:
Spindle to key: 92mm
Backset: 35, 45mm
Lever Lever locking operation
2 anti lift pins
1 centre latch
16 mm wide lockstrip
The letters LOCKMASTER or MILAMASTER will be engraved somewhere on the lockstrip.
This Lockmaster Multipoint door lock can be handed LH or RH by removing the centre latch and turning it.
Click here to view "Backset" and "Spindle to key" measurements
Two different types are available
Type 1: Centre of spindle hole to centre of top hook gearbox: 502mm
Centre of spindle hole to centre of bottom hook gearbox: 532mm
Also rollers should be towards the ends of the lockstrip, hooks towards the centre.
Type 2: Centre of spindle hole to centre of top hook gearbox: 720mm
Centre of spindle hole to centre of bottom hook gearbox: 770mm
Also hooks should be towards the ends of the lockstrip, rollers towards the centre.
Type 1 also has Teeth top and bottom to allow addition of shootbolt extensions (not included)
Click here to view suitable lever/lever handles.