N.B This lock used to come with "Mini" hooks, it has been updated to have full size hooks as shown in the photo. The hook gearboxes are 110mm long by 45mm deep. If you are replacing an old style "Mini" hook Cego lock you may have to enlarge the holes in the door for the hook cases. Also as you can see in the photo the lock has a hook in the centre where previously there was a deadbolt. You can still use the original keep on the frame as the hook comes out in the same position as the deadbolt did. Occasionally you may need to remove some plastic from behind the centre keep to allow the hook to locate behind.
Saracen Door Lock Specification:
1 centre latch,
16 mm wide silver face plate,
Lever Lever or Lever Pad locking operation
This Saracen Door Lock can be handed LH or RH by removing the centre latch and turning it.
Click here to view "Backset" and "Spindle to key" measurements
Two different types are available:
|Centre of spindle hole to centre of top hook gearbox||610mm|
|Centre of spindle hole to centre of bottom hook gearbox||610mm|
|Centre of spindle hole to centre of top hook gearbox||725mm|
|Centre of spindle hole to centre of bottom hook gearbox||750mm|
Click here to view suitable Lever/Lever door handles.
Click here to view suitable Lever/Pad door handles.
Please check that these handles cover any existing screw holes in the door.