All prices shown include VAT

  • Model: DBSAGB
  • Manufactured by: Saracen

Please Choose:

Backset




Saracen upvc Door Lockcase (Central Gearbox only)

£27.45 
£32.94 Inc VAT

Spindle to key92mm
Backset35, 45mm

Saracen Gearbox Lockcase Specification:

1 centre latch,
1 deadbolt,
Lever/Lever, Lever/Pad locking operation,
The centre latch can be handed LH or RH by removing and turning it.

Click here to view "Backset" and "Spindle to key" measurements


diagram of lever/lever handle

Click here to view suitable Lever/Lever door handles.


diagram of lever/pad handle

Click here to view suitable Lever/Pad door handles.


Please check that these handles cover any existing screw holes in the door.


Fitting this Saracen centre lock case

Remove the Saracen Multipoint (lock strip) lock from the door by first removing the handles, the lock barrel and the screws that hold the strip to the side of the door. With the Saracen lock strip removed, remove the centre case screws that hold the Saracen gearbox onto the locking strip, swap the gearbox, and put the whole locking system back in the door. Simple 20 min job using a screw driver.

This Saracen case will replace the gearboxes the current type Saracen upvc door locks and. Although the Saracen multipoint locks have different widths and different locking points, they use exactly the same gearbox to operate the mechanism. To identify which make of lock you have, look on the locking strip when the door is open, it should have the makers name on it.