WinkHaus Multipoint Door Lock Specification:
Spindle to key: 92mm
Backset: 28mm, 35mm, 45mm, 55mm
Lever Lever or Lever Pad locking operation
1 centre latch
This WinkHaus Multipoint Door Lock can be handed LH or RH by removing the centre latch and turning it.
16 or 20mm wide lockstrip.
The letters WINK HAUS will be engraved somewhere on the lockstrip
Click here to view "Backset" and "Spindle to key" measurements
Centre of spindle hole to centre of top hook gearbox: 721mm
Centre of spindle hole to centre of bottom hook gearbox: 770mm
Split spindle follower: allows the multipoint lock to work with lever/pad handles so that a key must be used to gain access even when the door isn't locked (available in 35mm, 45mm and 55mm b/set only)
Please also choose Rail width. This is the width of the long metal strip of the multipoint lock.
Click here to view suitable lever/lever handles.
Compatible Lever/Pad handles:
Hoppe Atlanta 220mm 92/92PZ Lever Pad Handles
Hoppe 240mm 92/92PZ Lever Pad Handles
Please check that these handles cover any existing screw holes in the door.