Wink Haus Door Lock Specification:
Spindle to key: 92mm
Backset: 28mm, 35mm, 45mm
Lever Lever or Lever Pad locking operation
1 centre latch
This Wink Haus Door Lock can be handed LH or RH by removing the centre latch and turning it.
16 mm wide faceplate.
The letters WINK HAUS will be engraved somewhere on the lockstrip
Click here to view "Backset" and "Spindle to key" measurements
Centre of spindle hole to centre of top hook gearbox: 722mm
Centre of spindle to centre of hook gearbox: 365mm
Centre of spindle to centre of hook gearbox: 417mm
Centre of spindle hole to centre of bottom hook gearbox: 772mm
Split spindle follower: allows the multipoint lock to work with lever/pad handles so that a key must be used to gain access even when the door isn't locked (available in 35mm and 45mm b/set only)
Click here to view suitable lever/lever handles.
Compatible Lever/Pad handles:
Hoppe Atlanta 220mm 92/92PZ Lever Pad Handles
Hoppe 240mm 92/92PZ Lever Pad Handles
Please check that these handles cover any existing screw holes in the door.