All prices shown include VAT

  • Model: DBYLGB
  • Manufactured by: Yale

Yale G2000 Lock Case Gearbox

£44.65 
£53.58 Inc VAT

Yale G2000 Centre case Door Lock Specification:

Spindle to key: 92mm, 62mm
Backset: 35mm
Lever Lever or lever pad locking operation
1 centre latch
1 hook
The centre latch can be handed LH or RH

Click here to view "Backset" and "Spindle to key" measurements


diagram of lever/lever handle

Click here to view suitable lever/lever handles.


diagram of lever/pad handle

Compatible Lever/Pad handles:
Hoppe 270mm Lever/Pad door handles.
Hoppe 240mm Lever/Pad door handles


Please check that these handles cover any existing screw holes in the door.

Fitting this Yale G2000 centre lock case

Remove the Yale G2000 Multipoint (lock strip) lock from the door by first removing the handles, the lock barrel and the screws that hold the strip to the side of the door. With the Yale G2000 lock strip removed, remove the centre case screws that hold the Yale G2000 gearbox onto the locking strip, swap the gearbox, and put the whole locking system back in the door. Simple 20 min job using a screw driver.

This Yale G2000 case will replace the gearboxes the old type Yale G2000 upvc door locks had. Although the Yale G2000 multipoint locks have different widths and different locking points, they use exactly the same gearbox to operate the mechanism. To identify which make of lock you have, look on the locking strip when the door is open, it should have the makers name on it.