ERA upvc Door Lockcase (Central Gearbox only)

£27.45excluding VAT

ERA upvc Door Lock (Central Gearbox only)

Spindle to key 92mm
Backset 35, 45mm

ERA Centrelock Specification:

1 centre latch,
1 deadbolt,
Lever/Lever, Lever/Pad locking operation,
The centre latch can be handed LH or RH by removing and turning it.

Click here to view ‘Backset’ and ‘Spindle to key’ measurements


diagram of lever/lever handle
Click here to view suitable Lever/Lever door handles.
diagram of lever/pad handle
Click here to view suitable Lever/Pad door handles.

Please check that these handles cover any existing screw holes in the door.

Fitting this ERA centre lock case

Remove the ERA Multipoint (lock strip) lock from the door by first removing the handles, the lock barrel and the screws that hold the strip to the side of the door. With the ERA lock strip removed, remove the centre case screws that hold the ERA gearbox onto the locking strip, swap the gearbox, and put the whole locking system back in the door. Simple 20 min job using a screw driver.

This Era case will replace the gearboxes on most ERA upvc door locks and the newer Composite Wooden type doors. Although the ERA multipoint locks have different widths and different locking points, they use exactly the same gearbox to operate the mechanism. To identify which make of lock you have, look on the locking strip when the door is open, it should have the makers name on it.

Additional information

Weight 0.8 kg

35mm, 45mm


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.